Get straightforward next steps when moisture damage, a musty odor or visible mold concerns you. Call whenever you need to talk about what got wet and the potential mold remediation process.
Mold removal finds the moisture source, contains the affected area, removes material that cannot be cleaned and dries what can stay.
Mold remediation, mold cleanup, mold abatement and mold mitigation describe related work. Your scope should tackle the underlying water intrusion or humidity issue as well as damp materials and visible mold growth.
You may need to discard carpet and porous drywall, ceiling tile included. Cleaning and drying are possible for many non-porous surfaces.
Moisture and material shape the cleanup plan.
Begin by stopping water. EPA advice for preventing mold growth is to dry areas and items damaged by water within 24 to 48 hours.
Use your property type, room or moisture cause to choose. You can also compare mold inspection, testing and cost guides.
If post-remediation verification is needed, an independent assessor avoids having the removal company check its own work.
Find out how condensation, leaks or excess humidity will be located and fixed.
Specify containment and affected materials in the scope, plus cleanup, repair and drying work and any factors affecting the price.
Preserve helpful records, keep from disturbing growth and stop water only when safe to do so.
Call (844) 352-3560Follow mold remediation steps in sequence: assess, set up containment, remove damaged material, clean and dry, verify results, and finally dismantle containment.
A moisture meter helps locate your moisture source and affected materials, with a thermal imaging camera used when helpful.
A containment barrier is made using poly sheeting. To limit particles entering clean rooms, negative air pressure works alongside an air filtration device called a HEPA air scrubber.
Workers make use of protective equipment. Drywall removal is one possible demolition task when damaged porous materials need removal.
Clean remaining non-porous surfaces through damp wiping and use of a HEPA vacuum. Use moisture readings, a dehumidifier and air movers to guide drying.
An independent assessor may use clearance testing, air sampling or a visual check for post-remediation verification.
Call whenever you need. A mold cleanup specialist takes your call, outlines what comes next and talks through the moisture problem with you.
Your affected materials can spread mold spores and dust to clean rooms when disturbed, which is why containment matters.
Pulling up carpet or cutting into drywall may release particles. To reduce movement, use negative air pressure together with HEPA filtration.
Your insulation, subfloor or framing could still be wet despite a surface appearing dry. Moisture readings help establish your affected area.
Black mold and toxic mold are search terms. You cannot judge mold risk by color, the CDC says.
Some people experience allergy or asthma symptoms triggered by mold. According to the CDC, higher risk applies to people with asthma, lung disease or weakened immune systems.
Fixr lists a typical national mold remediation range of $1,500 to $9,000. For professional work covering more than about 10 square feet, the listed rate is $10 to $30 per square foot. What you pay reflects materials, repairs, the affected area, drying and containment.
| More mold removal costs | Published range |
|---|---|
| Crawl space mold removal Source: Fixr, Mold Remediation Cost (checked 2026-10-23) | $500 to $2,000 |
Published national ranges are shown here, rather than a quote. Before work begins, you should get an explanation of the actual price determined through an on-site assessment.
For insurance coverage, both the cause of moisture and policy matter. A covered sudden water event could qualify; ongoing leaks, neglect and humidity often face exclusions or limits.
Before removing materials, ask what your insurance claim requires, whether coverage includes the water event and whether mold has a sublimit.
Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
After the water problem is fixed, occupants can often clean areas under about 10 square feet themselves, according to the EPA. Larger areas, HVAC involvement and contaminated water call for professional help.
Not sure? Call (844) 352-3560
Units plus shared buildings, taking plumbing and access into account.
Learn moreArea housing statistics describe local housing, without showing what condition your property is in. Use assessment findings to organize access, records and repairs for moisture problems.
Census ACS 2024 5-year (tables B01003, B25003, B25035, B09021 and B25024). Area estimates do not establish conditions at an individual property.
Your property needs its own assessment. The area figures do not establish the age or condition of your building. Plan access around the rooms and materials that need attention.
Keep dated photos and repair records. Ask who can authorize access, who will repair the moisture source and which records you should receive when cleanup is complete.
State guidance: Colorado General Assembly, HB19-1170 Residential Tenants Health & Safety Act (summary as enacted); Colorado General Assembly, SB24-094 Safe Housing for Residential Tenants (summary as enacted); Colorado General Assembly, HB25-1202 Increasing Public Awareness of Mold Health Effects (lost); EPA, Who can test my home or clean, fix and remediate my home for mold?; EPA, Region 8 state indoor air quality contacts (PDF)
Mold removal services are available across the city and surrounding communities.
Yes. Mold may come back when humidity, a leak or condensation goes uncorrected. Include identification of the moisture source and an explanation of drying and moisture control in the remediation plan.
For areas above about 10 square feet, extensive water damage, sewage or contaminated water, or an affected HVAC system, EPA guidance points you toward professional help.
Near windows, roofs, plumbing and HVAC equipment, look for signs of moisture, a musty odor and visible growth. You can trace damp material with a mold inspection. Mold testing is not required in every case with clear growth and an evident water source.
Color alone does not show how risky mold is. Base the removal plan on the affected area, material, moisture source and containment needs.
Consider your affected area, the moisture source correction, drying and material removal when asking how long it takes. Find out the work sequence before the start.
Get help with visible growth, musty odors and moisture damage, with calls answered 24 hours a day across the metro area.