Local mold removal
Mold Removal in Severance, CO
Call when you need help assessing and removing mold in Severance.
Call (844) 352-3560
Talk to a mold removal specialistAnswered 24 hours a day. No forms.
- Moisture source checked first
- Containment and HEPA filtration
- Homes, rentals and businesses
Moisture control mattersFix the water problem or mold can return.
24/7 callsDay, night, weekends and holidays
Moisture source firstFind and fix the leak or humidity
Contained work areaPlastic sheeting and HEPA filtration
SeveranceHomes, rentals and businesses
Local conditions
Local Factors for Mold Removal in Severance
Housing numbers tell you about the locality, rather than the state of your property. Plan access, moisture repairs and records around what an assessment finds.
10,130residentsACS 2024
8%of occupied housing units are rentedACS 2024
2014median year housing units were builtACS 2024
69residents 65+ live aloneACS 2024
Census ACS 2024 5-year (tables B01003, B25003, B25035, B09021 and B25024). Area estimates do not establish conditions at an individual property.
Single-family units make up 99 percent of all housing units in Severance. Confirm who can approve opening affected materials and how you will receive the findings and next steps.
In Severance, 10 percent of residents aged 65 or older live alone. Record visible damage, note when you first saw it and share any available leak repair records.
In Severance, renters occupy 8 percent of occupied housing units. Confirm who can approve opening affected materials and how you will receive the findings and next steps.
The median year built for housing units in Severance is 2014. This does not establish your building age or condition. Record visible damage, note when you first saw it and share any available leak repair records.
Local Mold Facts for Severance
- License: Colorado does not appear to have a statewide license for mold assessors or remediators. A 2025 bill that would have had the state register them did not pass, so it is worth asking any contractor about their training and checking local contractor rules.
- Disclosure: Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
- Renters: Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
- Agency: The Colorado Department of Public Health and Environment (CDPHE) is the state health agency that EPA lists as Colorado's indoor air quality contact.
State guidance: Colorado General Assembly, HB19-1170 Residential Tenants Health & Safety Act (summary as enacted); Colorado General Assembly, SB24-094 Safe Housing for Residential Tenants (summary as enacted); Colorado General Assembly, HB25-1202 Increasing Public Awareness of Mold Health Effects (lost); EPA, Who can test my home or clean, fix and remediate my home for mold?; EPA, Region 8 state indoor air quality contacts (PDF)
Call (844) 352-3560No forms. Just call.
Mold removal explained
What Mold Removal Includes
Your mold removal work involves containment of the affected area, identifying the moisture source, removing uncleanable material and drying whatever can stay.
Related types of work include mold cleanup, mold mitigation, mold remediation and mold abatement. Your scope should cover damp materials, visible mold growth and the underlying humidity issue or water intrusion.
Mold removal in Severance starts by finding and fixing the moisture source. The affected area is contained, damaged porous material may be removed, and remaining surfaces are cleaned and dried. Larger areas, HVAC systems, and growth linked to contaminated water call for professional help.
If your concern crosses a shared wall, ask who can authorize access on both sides and document which rooms need assessment.
- A musty odor or visibly growing mold
- Walls or floors with hidden moisture behind them
- Mold near HVAC equipment
- Harm left by a flood or leak
Call (844) 352-3560Talk it through with a cleanup specialist
Health and safety
Moisture and Affected Materials to Check
Disturbing affected materials can send dust and mold spores into clean rooms, making containment important.
Hidden Materials Can Stay Damp
Your insulation, subfloor or framing could still be wet despite a surface appearing dry. Use moisture readings to identify the affected area.
Mold Spores Can Spread
Particles can escape when you pull carpet or cut drywall. Movement can be limited using HEPA filtration alongside negative air pressure.
Some People Face More Risk
Mold may bring on symptoms of allergies and asthma for some people. According to the CDC, higher risk applies to people with asthma, lung disease or weakened immune systems.
Color Does Not Measure Risk
Search terms include toxic mold and black mold. The CDC explains that the color of mold does not reveal the risk.
Call (844) 352-3560Answered 24/7, including holidays
What you get
Choosing Mold Remediation Companies in Weld County
Use Independent Clearance Testing
An independent assessor can perform any needed post-remediation verification so the company doing removal does not also check that work.
Seek Clarity in Your Scope of Work
The scope should identify containment, affected materials, cleanup, drying, repairs and factors that can change the price.
Start With the Moisture Source
Request an explanation of how the leak or condensation or humidity issue will be identified and resolved.
Call (844) 352-3560Ask about cost and timing by phone
Every service
All 44 Mold Cleanup Services in Severance
Select the mold service that fits the signs on your property. If you do not know which page applies, you can call for guidance.
Mold Removal by Area of the Home
- Wood Framing Mold Removal (Joists, Studs, Rafters)
- Basement Mold Removal
- Wall and Drywall Mold Removal
- Garage Mold Removal
- Insulation Mold Removal
- Closet Mold Removal
- HVAC and Air Duct Mold Removal
- Bathroom Mold Removal
- Attic Mold Removal
- Ceiling Mold Removal
- Kitchen Mold Removal
- Crawl Space Encapsulation
- Floor and Subfloor Mold Removal
- Crawl Space Mold Removal
Mold Removal Methods
Mold Inspection and Testing
Mold Removal Cost Guide
Call (844) 352-3560Private help, day or night
First steps
Preparing to Contact Mold Removal Professionals in Weld County
Preserve helpful records, keep from disturbing growth and stop water only when safe to do so.
Call (844) 352-3560- Stop the water safely. Shut off a leaking fixture or arrange a repair. Keep clear of wet electrical equipment and standing water.
- Limit access. If possible, leave the door closed. Keep children and pets away from visible growth.
- Avoid spreading particles. Never scrape or brush mold, or sand mold, without containment. Turn off HVAC equipment that may contain mold.
- Photograph the damage. Document the leak and damage to items, including visible growth, before moving anything. Ask your insurer what records are necessary.
Step by step
The Mold Remediation Sequence
The mold remediation steps start with assessment and containment, followed by damaged material removal, cleaning, drying and verification, before containment comes down.
Mold Inspection and Moisture Mapping
A moisture meter helps locate your moisture source and affected materials, with a thermal imaging camera used when helpful.
Containment and Air Filtration
Build your containment barrier using poly sheeting. Clean rooms receive fewer migrating particles with negative air pressure and an air filtration device, the HEPA air scrubber.
Removal of Damaged Materials
Workers wear protective equipment. Damaged porous materials may require demolition, including drywall removal.
Surface Cleaning and Drying
For non-porous surfaces left in place, cleaning uses a HEPA vacuum plus damp wiping. Use moisture readings, a dehumidifier and air movers to guide drying.
Final Cleaning and Verification
For post-remediation verification, an independent assessor may check visually, conduct air sampling or perform clearance testing.
Price ranges
Mold Removal Cost in Severance, CO
According to Fixr, the typical nationwide range for mold remediation is $1,500 to $9,000. It lists $10 to $30 per square foot for professional work on areas over about 10 square feet. Containment, drying, repairs and materials determine your price along with the affected area.
Typical National Mold Remediation Range
$1,500 to $9,000Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Professional Pricing When Areas Exceed About 10 Square Feet
Per Square Foot: $10 to $30Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Typical Inspection With Lab Tests on Two Samples
$450 to $800Source: Fixr, Mold Inspection Cost (checked 2026-10-23)Insurance and who pays
Will Insurance Cover Mold Removal in Colorado, or Will You Pay?
Your policy and the moisture source determine insurance coverage. A sudden covered water event may qualify, while long-term leaks, humidity and neglect are commonly excluded or limited.
Renters and Landlords in Weld County
Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
Homeowners Insurance and Mold Removal
Before removing materials, ask what your insurance claim requires, whether coverage includes the water event and whether mold has a sublimit.
Property Disclosures
Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
Need a Mold Removal Service in Severance?
Phone at any hour. A mold cleanup specialist can outline what comes next for your property.
Questions
Mold Cleanup: Questions and Answers
Can removed mold grow back?
True. Leaving a leak or a humidity or condensation issue unresolved can mean returning mold. The remediation plan should identify the moisture source and explain drying and moisture control.
What is involved in checking for mold in your house?
Look for visible growth, a musty odor and moisture signs near plumbing, roofs, windows and HVAC equipment. A mold inspection can trace damp material. You do not always need mold testing if growth and its moisture source are obvious.
Should black mold be treated with a different process?
You cannot judge mold risk from color alone. Use the affected area and moisture source, plus material and containment needs, to shape your removal plan.
How long does mold remediation take?
Material removal and drying affect how long it takes, together with the affected area and repairs to the moisture source. Find out the work sequence before the start.
When should you seek professional mold removal?
EPA guidance directs you to professionals for an affected HVAC system, sewage or contaminated water, extensive water damage, or areas exceeding about 10 square feet.
Talk to a Mold Remediation Company Serving Greater Greeley
Calls are answered 24 hours a day, including weekends and holidays.